RC-45716 V Groove Insert 90 Deg. Double Edge Folding for Shaping Composite Panels, .090″ Tip Width x 19/64 x 43/64 Dia. x 1/4 Inch Shank

$76.00 $57.00

These bits are widely used as cladding for many diverse applications such as office buildings, hospitals, convention centers, airports, hotels. Routing V-shaped grooves, whereby the aluminum cover and a part of the polyethylene core is removed, allows folding the remaining material by hand.

Designed for cutting and scoring aluminum sandwich materials including:

  • Aluminum, Clay, Zinc & Wood Composite Panels
  • Aluminum Composite Materials (ACM)
  • Aluminum Composite Panel (ACP)*
  • ALPOLIC® Copper Composite Material (CCM)
  • Alucobond®
  • Alupanel®
  • Dibond®
  • Durabond**
  • e-panel™
  • Etalbond®
  • Phenolics
  • Plastic/Acrylic
  • Plexiglas®
  • Titanium Composite Material (TCM)
  • Wood

*Aluminum Composite Panel (ACP) is a type of ACM flat panel that consists of two thin aluminum sheets bonded to a non-aluminum core. ACPs are frequently used for external cladding or facades of buildings, insulation, and signage. **Durabond is a polyethylene core with 0.3mm colored aluminum sheet on either side, pre-finished requiring no decoration.


Tool No. RC-45716


(D) Diameter 43/64
(a°) Angle 90°
(B) Cutting Height 19/64
(d) Shank 1/4
Overall Length (L) 2-9/32
a1° 45°
B1 27/64
Max RPM 18,000
Flutes 2
Feed Rate IPM 240″
D1 .090″

Speed and Feed Rate

Double Edge ‘V’ Grooving Insert for ACM Materials Speed and Feed Chart

Download PDF

Replacement Parts

Tool No. Replacement Knife Torx Screw Torx Key
RC-45716  RCK-456  67312 5005