Description
Tool No. 45797
Diameter (D) | 1/2 |
---|---|
Angle (a°) | 108° |
Cutting Height (B) | 3/8 |
Shank (d) | 1/2 |
Overall Length (L) | 2-3/64 |
B1 | 5/32 |
Type | V Groove |
Flutes | 2 |
D1 | 0.090″ |
a1° | 54° |
Feed Rate IPM | 120″ |
RPM | 18,000 – 24,000 |
$50.00 $38.00
These bits are widely used as cladding for many diverse applications such as office buildings, hospitals, convention centers, airports, hotels. Routing V-shaped grooves, whereby the aluminum cover and a part of the polyethylene core is removed, allows folding the remaining material by hand.
Designed for cutting and scoring aluminum sandwich materials including:
*Aluminum Composite Panel (ACP) is a type of ACM flat panel that consists of two thin aluminum sheets bonded to a non-aluminum core. ACPs are frequently used for external cladding or facades of buildings, insulation, and signage. **Durabond is a polyethylene core with 0.3mm colored aluminum sheet on either side, pre-finished requiring no decoration.
Diameter (D) | 1/2 |
---|---|
Angle (a°) | 108° |
Cutting Height (B) | 3/8 |
Shank (d) | 1/2 |
Overall Length (L) | 2-3/64 |
B1 | 5/32 |
Type | V Groove |
Flutes | 2 |
D1 | 0.090″ |
a1° | 54° |
Feed Rate IPM | 120″ |
RPM | 18,000 – 24,000 |
Double Edge ‘V’ Grooving Insert for ACM Materials Speed and Feed Chart |