A.G.E.
-
MD219 Carbide Tipped Flush Trim 1/2 Dia x 1-1/2 x 1/2 Inch Shank 3-Flute Extra-LongCloseMD219 Carbide Tipped Flush Trim 1/2 Dia x 1-1/2 x 1/2 Inch Shank 3-Flute Extra-Long
Bits are designed with a 1/4" cutting edge for dado clean-out. Also used in hardwood and flooring medallions.
View Product Add to Cart
MD22-125 Carbide Tipped Thin Walled Aluminum and Non-Ferrous Metals 22 Inch Dia x 128T TCG -5 Deg 1 Inch Bore Circular Saw BladeCloseMD22-125 Carbide Tipped Thin Walled Aluminum and Non-Ferrous Metals 22 Inch Dia x 128T TCG -5 Deg 1 Inch Bore Circular Saw Blade
Designed specifically for cutting relatively thin walled (less than 1/4" thick) aluminum and non-ferrous extrusions and frames. Use a coolant…
View Product Add to Cart
CloseMD220 Carbide Tipped Bevel Laminate Trim 15 Deg x 5/8 Dia x 1/4 x 1/4 Inch Shank with Ball Bearing
This is a steel-bodied, carbide-tipped bit for bevel trimming laminate with a standard router. The solid construction reduces vibration for…
MD220 Carbide Tipped Bevel Laminate Trim 15 Deg x 5/8 Dia x 1/4 x 1/4 Inch Shank with Ball BearingMD220 Carbide Tipped Bevel Laminate Trim 15 Deg x 5/8 Dia x 1/4 x 1/4 Inch Shank with Ball Bearing
$28.20View Product Add to Cart
CloseMD220-642-30 Carbide Tipped Plastic 220mm Dia x 64T M-TCG -2 Deg 30mm Bore Circular Saw Blade
Designed for smooth, chip-free cutting of plastics. Higher tooth count blades will work better in thicker material. These saw blades…
MD220-642-30 Carbide Tipped Plastic 220mm Dia x 64T M-TCG -2 Deg 30mm Bore Circular Saw BladeMD220-642-30 Carbide Tipped Plastic 220mm Dia x 64T M-TCG -2 Deg 30mm Bore Circular Saw Blade
$162.58View Product Add to Cart
CloseMD220-T641 Carbide Tipped Plywood & Laminate 220mm Dia x 64T TCG 10 Deg 30mm Bore Circular Saw Blade
These blades are specifically designed for clean cuts in plywood and single-sided laminates. The greater number of teeth, triple-chip grind…
MD220-T641 Carbide Tipped Plywood & Laminate 220mm Dia x 64T TCG 10 Deg 30mm Bore Circular Saw BladeMD220-T641 Carbide Tipped Plywood & Laminate 220mm Dia x 64T TCG 10 Deg 30mm Bore Circular Saw Blade
$150.55View Product Add to Cart
MD220-T643 Carbide Tipped Double-Sided Melamine 220mm Dia x 64T H-ATB -5 Deg 30mm Bore Circular Saw BladeCloseMD220-T643 Carbide Tipped Double-Sided Melamine 220mm Dia x 64T H-ATB -5 Deg 30mm Bore Circular Saw Blade
Designed for cutting double-sided melamine and veneered sheet goods on saws without a scoring unit. The H-ATB tooth geometry slices…
View Product Add to Cart
CloseMD221 Carbide Tipped Bevel Laminate Trim 22 Deg x 1/2 Dia x 5/16 x 1/4 Inch Shank with Ball Bearing
This is a steel-bodied, carbide-tipped bit for bevel trimming laminate with a standard router. The solid construction reduces vibration for…
MD221 Carbide Tipped Bevel Laminate Trim 22 Deg x 1/2 Dia x 5/16 x 1/4 Inch Shank with Ball BearingMD221 Carbide Tipped Bevel Laminate Trim 22 Deg x 1/2 Dia x 5/16 x 1/4 Inch Shank with Ball Bearing
$29.29View Product Add to Cart
CloseMD222 Carbide Tipped Bevel Laminate Trim 25 Deg x 23/23 Dia x 1/4 x 1/4 Inch Shank with Ball Bearing
This is a steel-bodied, carbide-tipped bit for bevel trimming laminate with a standard router. The solid construction reduces vibration for…
MD222 Carbide Tipped Bevel Laminate Trim 25 Deg x 23/23 Dia x 1/4 x 1/4 Inch Shank with Ball BearingMD222 Carbide Tipped Bevel Laminate Trim 25 Deg x 23/23 Dia x 1/4 x 1/4 Inch Shank with Ball Bearing
$28.75View Product Add to Cart
MD224 Carbide Tipped Bevel Laminate Trim 45 Deg x 1-1/16 Dia x 9/32 x 1/4 Inch Shank with Ball BearingCloseMD224 Carbide Tipped Bevel Laminate Trim 45 Deg x 1-1/16 Dia x 9/32 x 1/4 Inch Shank with Ball Bearing
Chamfer or bevel edges for decorative effect or to form edge miter joints. Produce crisp, uniform edges at accurate angles…
View Product Add to Cart
MD230 Carbide Tipped V Groove 60 Deg x 1/2 Dia x 5/8 x 1/4 Inch ShankCloseMD230 Carbide Tipped V Groove 60 Deg x 1/2 Dia x 5/8 x 1/4 Inch Shank
Cut decorative ‘V’ grooves and lettering on signs with these ‘V’ Groove bits. Use with an edge guide to chamfer…
View Product Add to Cart
MD232 Carbide Tipped V Groove 90 Deg x 3/8 Dia x 7/16 x 1/4 Inch ShankCloseMD232 Carbide Tipped V Groove 90 Deg x 3/8 Dia x 7/16 x 1/4 Inch Shank
Cut decorative ‘V’ grooves and lettering on signs with these ‘V’ Groove bits. Use with an edge guide to chamfer…
View Product Add to Cart
MD234 Carbide Tipped V Groove 90 Deg x 1/2 Dia x 1/2 x 1/4 Inch ShankCloseMD234 Carbide Tipped V Groove 90 Deg x 1/2 Dia x 1/2 x 1/4 Inch Shank
The dovetail joint is the strongest construction method for drawers, boxes, chests and fine casework. Cut butterfly keys, splines and…
Copyright © 2025 All Rights Reserved | CanCam Industrial CNC | Legal Disclaimer | Refund Policy | Privacy Policy | AI & LLM Brand Info