A.G.E.
-
MD276 Carbide Tipped Corner Round 1/2 Radius x 1-1/2 Dia x 3/4 x 1/4 Inch Shank
The basic edge-forming bit, the corner-rounding bit rounds an edge to a given radius. The tool is shouldered to cut…
Add to CartMD278 Carbide Tipped Corner Round 1/2 Radius x 1-1/2 Dia x 3/4 x 1/2 Inch Shank
The basic edge-forming bit, the corner-rounding bit rounds an edge to a given radius. The tool is shouldered to cut…
Add to CartMD280 Carbide Tipped Corner Round 3/4 Radius x 2 Inch Dia x 1 Inch x 1/2 Shank
The basic edge-forming bit, the corner-rounding bit rounds an edge to a given radius. The tool is shouldered to cut…
Add to CartMD282 Carbide Tipped Corner Round 1 Inch Radius x 2-1/2 Dia x 1-1/4 x 1/2 Inch Shank
The Roman ogee bit, which has a convex curve coming off the bearing, produces the reverse of the ogee (it…
Add to CartMD302 Carbide Tipped Classical Bead & Cove 15/64 x 7/32 Radius x 1-1/2 Dia x 5/8 x 1/4 Inch Shank
The basic edge-forming bit, the corner-rounding bit rounds an edge to a given radius. The tool is shouldered to cut…
MD302 Carbide Tipped Classical Bead & Cove 15/64 x 7/32 Radius x 1-1/2 Dia x 5/8 x 1/4 Inch ShankMD302 Carbide Tipped Classical Bead & Cove 15/64 x 7/32 Radius x 1-1/2 Dia x 5/8 x 1/4 Inch Shank
$65.58Add to CartMD310 Carbide Tipped Roman Ogee 5/32 Radius x 1 Inch Dia x 15/32 x 1/4 Shank
The Roman ogee bit, which has a convex curve coming off the bearing, produces the reverse of the ogee (it…
Add to CartMD311 Carbide Tipped Roman Ogee 5/32 Radius x 1 Inch Dia x 5/8 x 1/2 Shank
The Roman ogee bit, which has a convex curve coming off the bearing, produces the reverse of the ogee (it…
Add to CartMD312 Carbide Tipped Roman Ogee 1/4 Radius x 1-3/8 Dia x 21/32 x 1/4 Inch Shank
The Roman ogee bit, which has a convex curve coming off the bearing, produces the reverse of the ogee (it…
Add to CartMD314 Carbide Tipped Roman Ogee 1/4 Radius x 1-3/8 Dia x 7/8 x 1/2 Inch Shank
One of the easiest ways to dress up a room is to replace the skimpy base molding with a wide,…
Add to CartMD324 Rabbeting 3/8 Depth x 1-1/4 Dia x 1/2 x 1/4 Inch Shank
This is the basic rabbeting bit. It cuts 3/8" wide and up to 1/2" deep. Switch to one of four…
Add to CartMD326 Rabbeting 3/8 Depth x 1-1/4 Dia x 1/2 x 1/2 Inch Shank
The Multi-Rabbet bit steps in 1/16" increments from a 1/8" cut width to 1/2", simply by switching ball-bearing guides. Six…
Add to CartMD330 Carbide Tipped Dovetail 14 Deg x 1/2 Dia x 1/2 x 1/4 Inch Shank
Groove edges for T-moldings, splines or biscuits and other purposes. Rout tongue-and-groove joinery. 3-wing cutters provide an excellent cut finish.
Copyright © 2024 All Rights Reserved | CanCam Industrial CNC | Legal Disclaimer | Refund Policy | Privacy Policy