A.G.E.
-
MD24-145 Carbide Tipped Thin Walled Aluminum and Non-Ferrous Metals 24 Inch Dia x 140T TCG -5 Deg 1 Inch Bore Circular Saw Blade
Designed specifically for cutting relatively thin walled (less than 1/4" thick) aluminum and non-ferrous extrusions and frames. Use a coolant…
Add to CartMD24-480 Carbide Tipped Ripping 24 Inch Dia x 48T ATB 20 Deg 1 Inch Bore Circular Saw Blade
The low tooth count and large gullets combine to make these blades fast and aggressive. The absolutely flat, laser-cut body…
Add to CartMD240 Carbide Tipped Core Box 1/8 Radius x 1/4 Dia x 1/4 x 1/4 Inch Shank
Cut half-round grooves for fluted moldings, columns, millwork and signs using a core box bit. Used with an edge guide,…
Add to CartMD242 Carbide Tipped Core Box 3/16 Radius x 3/8 Dia x 1/4 x 1/4 Inch Shank
Cut half-round grooves for fluted moldings, columns, millwork and signs using a core box bit. Used with an edge guide,…
Add to CartMD244 Carbide Tipped Core Box 1/4 Radius x 1/2 Dia x 3/8 x 1/4 Inch Shank
Cut half-round grooves for fluted moldings, columns, millwork and signs using a core box bit. Used with an edge guide,…
Add to CartMD250-801-30 Carbide Tipped Plywood & Laminate 250mm Dia x 80T TCG 10 Deg 30mm Bore Circular Saw Blade
These blades are specifically designed for clean cuts in plywood and single-sided laminates. The greater number of teeth, triple-chip grind…
Add to CartMD252 Carbide Tipped Chamfer 45 Degree x 1-1/4 Dia x 17/32 x 1/4 Inch Shank
Chamfer or bevel edges for decorative effect or to form edge miter joints. Produce crisp, uniform edges at accurate angles…
Add to CartMD254 Carbide Tipped Chamfer 45 Degree x 1-1/4 Dia x 17/32 x 1/2 Inch Shank
Chamfer or bevel edges for decorative effect or to form edge miter joints. Produce crisp, uniform edges at accurate angles…
Add to CartMD256 Carbide Tipped Chamfer 45 Degree x 2 Inch Dia x 3/4 x 1/2 Shank
Chamfer or bevel edges for decorative effect or to form edge miter joints. Produce crisp, uniform edges at accurate angles…
Add to CartMD257 Carbide Tipped Chamfer 45 Degree x 2-3/8 Dia x 1 Inch x 1/2 Shank w/ Lower Ball Bearing
This is the basic rabbeting bit. It cuts 3/8" wide and up to 1/2" deep. Switch to one of four…
MD257 Carbide Tipped Chamfer 45 Degree x 2-3/8 Dia x 1 Inch x 1/2 Shank w/ Lower Ball BearingMD257 Carbide Tipped Chamfer 45 Degree x 2-3/8 Dia x 1 Inch x 1/2 Shank w/ Lower Ball Bearing
$93.66Add to CartMD258 Carbide Tipped Chamfer 22-1/2 Degree x 1-1/4 Dia x 15/16 x 1/2 Inch Shank
Chamfer or bevel edges for decorative effect or to form edge miter joints. Produce crisp, uniform edges at accurate angles…
Add to CartMD259 Carbide Tipped Chamfer 30 Degree x 1-3/8 Dia x 13/16 x 1/2 Inch Shank
Chamfer or bevel edges for decorative effect or to form edge miter joints. Produce crisp, uniform edges at accurate angles…
Copyright © 2024 All Rights Reserved | CanCam Industrial CNC | Legal Disclaimer | Refund Policy | Privacy Policy