-
MD14-800 Carbide Tipped Cut-Off & Crosscut 14 Inch Dia x 80T ATB 12 Deg 1 Inch Bore Circular Saw BladeCloseMD14-800 Carbide Tipped Cut-Off & Crosscut 14 Inch Dia x 80T ATB 12 Deg 1 Inch Bore Circular Saw Blade
These blades are designed for smooth crosscuts in a variety of materials from hardwoods, softwoods and sheet goods including chipboard.…
View Product Add to Cart
MD14-801 Carbide Tipped Plywood & Laminate 14 Inch Dia x 80T TCG 10 Deg 1 Inch Bore Circular Saw BladeCloseMD14-801 Carbide Tipped Plywood & Laminate 14 Inch Dia x 80T TCG 10 Deg 1 Inch Bore Circular Saw Blade
These blades are specifically designed for clean cuts in plywood and single-sided laminates. The greater number of teeth, triple-chip grind…
View Product Add to Cart
MD14-840 Carbide Tipped Cut-Off & Crosscut 14 Inch Dia x 84T ATB 10 Deg 1 Inch Bore Circular Saw BladeCloseMD14-840 Carbide Tipped Cut-Off & Crosscut 14 Inch Dia x 84T ATB 10 Deg 1 Inch Bore Circular Saw Blade
These blades are designed for smooth crosscuts in a variety of materials from hardwoods, softwoods and sheet goods including chipboard.…
View Product Add to Cart
MD14-845 Carbide Tipped Thick Walled Aluminum and Non-Ferrous Metals 14 Inch Dia x 84T TCG -6 Deg 1 inch Bore Circular Saw BladeCloseMD14-845 Carbide Tipped Thick Walled Aluminum and Non-Ferrous Metals 14 Inch Dia x 84T TCG -6 Deg 1 inch Bore Circular Saw Blade
Designed specifically for cutting relatively thick walled (greater than 1/4" thick) aluminum. The special carbide formulation and blade geometry make…
View Product Add to Cart
MD14-966TB Carbide Tipped Thin Kerf Sliding Compound Miter & Radial Arm 14 Inch Dia x 96T 2 ATB + 1 FT -5 Deg 1 Inch Bore Circular Saw BladeCloseMD14-966TB Carbide Tipped Thin Kerf Sliding Compound Miter & Radial Arm 14 Inch Dia x 96T 2 ATB + 1 FT -5 Deg 1 Inch Bore Circular Saw Blade
These blades are specially designed for sliding compound miter saws, providing an exceptional finish. The 5º negative hook angle provides…
View Product Add to Cart
MD140 Carbide Tipped Straight Plunge 1/2 Dia x 1-1/4 x 1/2 Inch ShankCloseMD140 Carbide Tipped Straight Plunge 1/2 Dia x 1-1/4 x 1/2 Inch Shank
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut…
View Product Add to Cart
MD142 Carbide Tipped Straight Plunge 1/2 Dia x 1-1/2 x 1/2 Inch ShankCloseMD142 Carbide Tipped Straight Plunge 1/2 Dia x 1-1/2 x 1/2 Inch Shank
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut…
View Product Add to Cart
MD147 Carbide Tipped Straight Plunge 9/16 Dia x 1-1/4 x 1/2 Inch ShankCloseMD147 Carbide Tipped Straight Plunge 9/16 Dia x 1-1/4 x 1/2 Inch Shank
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut…
View Product Add to Cart
MD148 Carbide Tipped Straight Plunge 5/8 Dia x 1-1/4 x 1/2 Inch ShankCloseMD148 Carbide Tipped Straight Plunge 5/8 Dia x 1-1/4 x 1/2 Inch Shank
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut…
View Product Add to Cart
MD15-105 Carbide Tipped Thin Walled Aluminum and Non-Ferrous Metals 14 Inch Dia x 108T TCG -6 Deg 1 Inch Bore Circular Saw BladeCloseMD15-105 Carbide Tipped Thin Walled Aluminum and Non-Ferrous Metals 14 Inch Dia x 108T TCG -6 Deg 1 Inch Bore Circular Saw Blade
Designed specifically for cutting relatively thin walled (less than 1/4" thick) aluminum and non-ferrous extrusions and frames. Use a coolant…
View Product Add to Cart
MD154 Carbide Tipped Straight Plunge 1 Inch Dia x 1-1/4 x 1/2 ShankCloseMD154 Carbide Tipped Straight Plunge 1 Inch Dia x 1-1/4 x 1/2 Shank
A proper mortising bit should have a large gullet between the two flutes which allows for greater chip clearance and…
View Product Add to Cart
MD16-121 Carbide Tipped Plywood & Laminate 16 Inch Dia x 120T TCG 10 Deg 1 Inch Bore Circular Saw BladeCloseMD16-121 Carbide Tipped Plywood & Laminate 16 Inch Dia x 120T TCG 10 Deg 1 Inch Bore Circular Saw Blade
These blades are specifically designed for clean cuts in plywood and single-sided laminates. The greater number of teeth, triple-chip grind…
Copyright © 2026 All Rights Reserved | CanCam Industrial CNC | Legal Disclaimer | Refund Policy | Privacy Policy | AI & LLM Brand Info×Schedule a Demo
A demo with one of our Canadian product experts can answer all your questions.
"*" indicates required fields