-
MD212 Carbide Tipped Flush Trim 1/2 Dia x 1 Inch x 1/2 ShankCloseMD212 Carbide Tipped Flush Trim 1/2 Dia x 1 Inch x 1/2 Shank
Two-flute is a good general-purpose choice, providing fast cuts and good finishes. Use this flush trimming bit for laminate work…
View Product Add to Cart
MD214 Carbide Tipped Flush Trim 1/2 Dia x 1-1/2 x 1/2 Inch ShankCloseMD214 Carbide Tipped Flush Trim 1/2 Dia x 1-1/2 x 1/2 Inch Shank
Two-flute is a good general-purpose choice, providing fast cuts and good finishes. Use this flush trimming bit for laminate work…
View Product Add to Cart
MD215 Carbide Tipped Flush Trim 1/2 Dia x 1/2 x 1/4 Inch Shank 3-FluteCloseMD215 Carbide Tipped Flush Trim 1/2 Dia x 1/2 x 1/4 Inch Shank 3-Flute
For an extremely smooth finish, choose the three-flute configuration. It is especially good to use on laminates that tend to…
View Product Add to Cart
MD216 Carbide Tipped Flush Trim 1/2 Dia x 2 Inch x 1/2 Shank with Double Ball BearingCloseMD216 Carbide Tipped Flush Trim 1/2 Dia x 2 Inch x 1/2 Shank with Double Ball Bearing
For an extremely smooth finish, choose the three-flute configuration. It is especially good to use on laminates that tend to…
View Product Add to Cart
MD217 Carbide Tipped Flush Trim 1/2 Dia x 1 Inch x 1/2 Shank 3-FluteCloseMD217 Carbide Tipped Flush Trim 1/2 Dia x 1 Inch x 1/2 Shank 3-Flute
Use this bit for template or pattern work where the workpiece is unusually thick. The two-flute configuration cuts fast and…
View Product Add to Cart
MD218 Carbide Tipped Flush Trim 1/2 Dia x 1 Inch x 1/4 Shank 3-FluteCloseMD218 Carbide Tipped Flush Trim 1/2 Dia x 1 Inch x 1/4 Shank 3-Flute
For an extremely smooth finish, choose the three-flute configuration. It is especially good to use on laminates that tend to…
View Product Add to Cart
MD219 Carbide Tipped Flush Trim 1/2 Dia x 1-1/2 x 1/2 Inch Shank 3-Flute Extra-LongCloseMD219 Carbide Tipped Flush Trim 1/2 Dia x 1-1/2 x 1/2 Inch Shank 3-Flute Extra-Long
Bits are designed with a 1/4" cutting edge for dado clean-out. Also used in hardwood and flooring medallions.
View Product Add to Cart
MD22-125 Carbide Tipped Thin Walled Aluminum and Non-Ferrous Metals 22 Inch Dia x 128T TCG -5 Deg 1 Inch Bore Circular Saw BladeCloseMD22-125 Carbide Tipped Thin Walled Aluminum and Non-Ferrous Metals 22 Inch Dia x 128T TCG -5 Deg 1 Inch Bore Circular Saw Blade
Designed specifically for cutting relatively thin walled (less than 1/4" thick) aluminum and non-ferrous extrusions and frames. Use a coolant…
View Product Add to Cart
CloseMD220 Carbide Tipped Bevel Laminate Trim 15 Deg x 5/8 Dia x 1/4 x 1/4 Inch Shank with Ball Bearing
This is a steel-bodied, carbide-tipped bit for bevel trimming laminate with a standard router. The solid construction reduces vibration for…
MD220 Carbide Tipped Bevel Laminate Trim 15 Deg x 5/8 Dia x 1/4 x 1/4 Inch Shank with Ball BearingMD220 Carbide Tipped Bevel Laminate Trim 15 Deg x 5/8 Dia x 1/4 x 1/4 Inch Shank with Ball Bearing
$28.20View Product Add to Cart
CloseMD220-642-30 Carbide Tipped Plastic 220mm Dia x 64T M-TCG -2 Deg 30mm Bore Circular Saw Blade
Designed for smooth, chip-free cutting of plastics. Higher tooth count blades will work better in thicker material. These saw blades…
MD220-642-30 Carbide Tipped Plastic 220mm Dia x 64T M-TCG -2 Deg 30mm Bore Circular Saw BladeMD220-642-30 Carbide Tipped Plastic 220mm Dia x 64T M-TCG -2 Deg 30mm Bore Circular Saw Blade
$162.58View Product Add to Cart
CloseMD220-T641 Carbide Tipped Plywood & Laminate 220mm Dia x 64T TCG 10 Deg 30mm Bore Circular Saw Blade
These blades are specifically designed for clean cuts in plywood and single-sided laminates. The greater number of teeth, triple-chip grind…
MD220-T641 Carbide Tipped Plywood & Laminate 220mm Dia x 64T TCG 10 Deg 30mm Bore Circular Saw BladeMD220-T641 Carbide Tipped Plywood & Laminate 220mm Dia x 64T TCG 10 Deg 30mm Bore Circular Saw Blade
$150.55View Product Add to Cart
MD220-T643 Carbide Tipped Double-Sided Melamine 220mm Dia x 64T H-ATB -5 Deg 30mm Bore Circular Saw BladeCloseMD220-T643 Carbide Tipped Double-Sided Melamine 220mm Dia x 64T H-ATB -5 Deg 30mm Bore Circular Saw Blade
Designed for cutting double-sided melamine and veneered sheet goods on saws without a scoring unit. The H-ATB tooth geometry slices…
Copyright © 2026 All Rights Reserved | CanCam Industrial CNC | Legal Disclaimer | Refund Policy | Privacy Policy | AI & LLM Brand Info×Schedule a Demo
A demo with one of our Canadian product experts can answer all your questions.
"*" indicates required fields