-
3-Flute Rabbeting 3/4 Depth x 1-7/8 Dia x 1 x 1/2 Inch Shank
This is the basic rabbeting bit. It cuts 3/4" wide and up to 1" deep. Switch to one of four…
Add to CartBinding/Rabbeting 15mm (19/32) Dia x 11.5mm (7/16) x 1/4 Inch Shank Router Bit Set
Carbide Tipped - Down shear angle - 3 Flute with ball bearing guide. Special set designed for Luthier. This set…
Add to CartBinding/Rabbeting 20mm (51/64) Dia x 13.5mm (17/32) x 1/4 Inch Shank Router Bit Set
Carbide Tipped - Down shear angle - 3 Flute with ball bearing guide. Special set designed for Luthier. This set…
Add to CartInsert Mini Superabbet 1-1/8 Dia x 12mm x 1/4 Inch Shank Router Bit
A mini version of the Superabbet™, this tool features four-sided replaceable carbide knives and a reduced cut depth capacity. It…
Add to CartMulti-Rabbet Five Different Rabbet Depths 1-3/8 Dia x 1 x 1/2 Inch Shank 4 Flute Router Bit
The Multi-Rabbet bit steps in 1/16" increments from a 1/4" cut width to 1/2", simply by switching ball-bearing guides. Five…
Add to CartMulti-Rabbet Four Different Rabbet Depths 1-1/4 Dia x 1/2 x 1/2 Inch Shank 4 Flute Up-Shear Router Bit
The Multi-Rabbet bit steps in 1/16" increments from a 7/16" cut width to 1/4", simply by switching ball-bearing guides. Four…
Add to CartRabbeting 1/2 Depth x 1-3/8 Dia x 1/2 x 1/2 Inch Shank
This is the basic rabbeting bit. It cuts 1/2" wide and up to 1/2" deep. Switch to one of four…
Add to CartRabbeting 1/2 Depth x 1-3/8 Dia x 1/2 x 1/4 Inch Shank
This is the basic rabbeting bit. It cuts 1/2" wide and up to 1/2" deep. Switch to one of four…
Add to CartRabbeting 1/4 Depth x 7/8 Dia x 1/2 x 1/4 Inch Shank
This is the basic rabbeting bit. It cuts 1/4" wide and up to 1/2" deep. Switch to one of four…
Add to CartRabbeting 1/4 Depth x 7/8 Dia x 5/8 x 1/2 Inch Shank
This is the basic rabbeting bit. It cuts 1/4" wide and up to 5/8" deep. Switch to one of four…
Add to CartSpecial Rabbet Bit 9/32 Depth x 1-1/16 Dia x 7/8 x 1/2 Inch Shank
Designed for the "smart clip" backsplash system. Depth of rabbet 9/32"
Add to CartStepped Rabbet 3/4 Dia x 5/8 x 1/4 Inch Shank
Copyright © 2024 All Rights Reserved | CanCam Industrial CNC | Legal Disclaimer | Refund Policy | Privacy Policy