-
DT12960-30 Carbide Tipped Sliding Table Saw 12 Inch Dia x 96T ATB, 10 Deg, 30mm BoreCloseDT12960-30 Carbide Tipped Sliding Table Saw 12 Inch Dia x 96T ATB, 10 Deg, 30mm Bore
This high-performance crosscutting blade is designed primarily for use in sliding table saws, such as Striebig®, Altendorf®, SCMI® and Delta®…
View Product Add to Cart
DT12961 Carbide Tipped Sliding Table Saw 12 Inch Dia x 96T TCG, 10 Deg, 1 Inch BoreCloseDT12961 Carbide Tipped Sliding Table Saw 12 Inch Dia x 96T TCG, 10 Deg, 1 Inch Bore
This high-performance crosscutting blade is designed primarily for use in sliding table saws, such as Striebig®, Altendorf®, SCMI® and Delta®…
View Product Add to Cart
DT12961-30 Carbide Tipped Sliding Table Saw 12 Inch Dia x 96T TCG, 10 Deg, 30mm BoreCloseDT12961-30 Carbide Tipped Sliding Table Saw 12 Inch Dia x 96T TCG, 10 Deg, 30mm Bore
This high-performance crosscutting blade is designed primarily for use in sliding table saws, such as Striebig®, Altendorf®, SCMI® and Delta®…
View Product Add to Cart
DT14109 Carbide Tipped Sliding Table Saw 14 Inch Dia x 108T TCG, 10 Deg, 1 Inch BoreCloseDT14109 Carbide Tipped Sliding Table Saw 14 Inch Dia x 108T TCG, 10 Deg, 1 Inch Bore
This high-performance crosscutting blade is designed primarily for use in sliding table saws, such as Striebig®, Altendorf®, SCMI® and Delta®…
View Product Add to Cart
DT14109-30 Carbide Tipped Sliding Table Saw 14 Inch Dia x 108T TCG, 10 Deg, 30mm BoreCloseDT14109-30 Carbide Tipped Sliding Table Saw 14 Inch Dia x 108T TCG, 10 Deg, 30mm Bore
This high-performance crosscutting blade is designed primarily for use in sliding table saws, such as Striebig®, Altendorf®, SCMI® and Delta®…
View Product Add to Cart
DT14840 Carbide Tipped Sliding Table Saw 14 Inch Dia x 84T ATB, 10 Deg, 1 Inch BoreCloseDT14840 Carbide Tipped Sliding Table Saw 14 Inch Dia x 84T ATB, 10 Deg, 1 Inch Bore
This high-performance crosscutting blade is designed primarily for use in sliding table saws, such as Striebig®, Altendorf®, SCMI® and Delta®…
View Product Add to Cart
DT14840-30 Carbide Tipped Sliding Table Saw 14 Inch Dia x 84T ATB, 10 Deg, 30mm BoreCloseDT14840-30 Carbide Tipped Sliding Table Saw 14 Inch Dia x 84T ATB, 10 Deg, 30mm Bore
This high-performance crosscutting blade is designed primarily for use in sliding table saws, such as Striebig®, Altendorf®, SCMI® and Delta®…
View Product Add to Cart
DT14841 Carbide Tipped Sliding Table Saw 14 Inch Dia x 84T TCG, 10 Deg, 1 Inch BoreCloseDT14841 Carbide Tipped Sliding Table Saw 14 Inch Dia x 84T TCG, 10 Deg, 1 Inch Bore
This high-performance crosscutting blade is designed primarily for use in sliding table saws, such as Striebig®, Altendorf®, SCMI® and Delta®…
View Product Add to Cart
DT180T30-45 Carbide Tipped Ditec 2000 Adjustable Type Scoring 180mm Dia x 30T ATB, 8 Deg, 45mm Bore, Scoring SetCloseDT180T30-45 Carbide Tipped Ditec 2000 Adjustable Type Scoring 180mm Dia x 30T ATB, 8 Deg, 45mm Bore, Scoring Set
Used on panel saws with separate scoring units for chip-free cuts on both sides of the material. With conical type…
View Product Add to Cart
DT200T36-20 Carbide Tipped Ditec 2000 Adjustable Type Scoring 200mm Dia x 36T ATB, 8 Deg, 20mm Bore, Scoring SetCloseDT200T36-20 Carbide Tipped Ditec 2000 Adjustable Type Scoring 200mm Dia x 36T ATB, 8 Deg, 20mm Bore, Scoring Set
Used on panel saws with separate scoring units for chip-free cuts on both sides of the material. With conical type…
View Product Add to Cart
DT200T36-45 Carbide Tipped Ditec 2000 Adjustable Type Scoring 200mm Dia x 36T ATB, 8 Deg, 45mm Bore, Scoring SetCloseDT200T36-45 Carbide Tipped Ditec 2000 Adjustable Type Scoring 200mm Dia x 36T ATB, 8 Deg, 45mm Bore, Scoring Set
Used on panel saws with separate scoring units for chip-free cuts on both sides of the material. With conical type…
View Product Add to Cart
DT220T640 Carbide Tipped Ditec Holz-Her General Purpose 220mm Dia x 64T H-ATB, 0 Deg, 30mm BoreCloseDT220T640 Carbide Tipped Ditec Holz-Her General Purpose 220mm Dia x 64T H-ATB, 0 Deg, 30mm Bore
If you cut melamine on a regular basis, this is the blade you should use. It has the same features…
Copyright © 2026 All Rights Reserved | CanCam Industrial CNC | Legal Disclaimer | Refund Policy | Privacy Policy | AI & LLM Brand Info×Schedule a Demo
A demo with one of our Canadian product experts can answer all your questions.
"*" indicates required fields