47147 Carbide Tipped Laminate Trimmer with Euro™ Square Bearing 1/2 Dia x 19/64 x 1/4 Inch Shank Router Bit
$35.07
Usually ships on the 2nd business day from order date.
Diameter (D) | 1/2 |
---|---|
(B) Cutting Height | 19/64 |
Shank (d) | 1/4 |
Overall Length (L) | 1-3/4 |
Replacement Bearing | SQB100 |
Flutes | 2 |
Description
Amana Tool® industrial quality carbide tipped laminate trim bits with the Euro™ Square Bearings. The bits are designed according to specifications with a slight taper allowing for adjustment up or down on the work edge to finish off the edge with a smooth and burr free cut.
The square bearing is manufactured with a strong non-stick Teflon® which won’t mark your edge so it can be wiped clean easily.
- Leaves no marks on high-gloss, finished edges
- Use 3/4″ diameter bit with routers
- Glue won’t stick to bearing
- Beveled cutter means little or no hand filing
- Will not scratch high gloss laminates
- Beveled cutter can be resharpened
Specifications
Diameter (D) | 1/2 |
Cutting Height (B) | 19/64 |
Shank (d) | 1/4 |
Overall Length (L) | 1-3/4 |
Replacement Bearing | SQB100 |
Flutes | 2 |