A.G.E.
-
MD10-801-30 Carbide Tipped Plywood & Laminate 10 Inch Dia x 80T TCG 10 Deg 30mm Bore Circular Saw Blade
These blades are specifically designed for clean cuts in plywood and single-sided laminates. The greater number of teeth, triple-chip grind…
Add to CartMD10-802 Carbide Tipped Plastic 10 Inch Dia x 80T M-TCG -2 Deg 5/8 Bore Circular Saw Blade
Designed for smooth, chip-free cutting of plastics. Higher tooth count blades will work better in thicker material. These saw blades…
Add to CartMD10-803 Carbide Tipped Double-Sided Melamine 10 Inch Dia x 80T H-ATB -5 Deg 5/8 Bore Circular Saw Blade
Designed for cutting double-sided melamine and veneered sheet goods on saws without a scoring unit. The H-ATB tooth geometry slices…
Add to CartMD10-803-30 Carbide Tipped Double-Sided Melamine 10 Inch Dia x 80T H-ATB -5 Deg 30mm Bore Circular Saw Blade
Designed for cutting double-sided melamine and veneered sheet goods on saws without a scoring unit. The H-ATB tooth geometry slices…
Add to CartMD10-803TB Carbide Tipped Thin Kerf Double-Sided Melamine 10 Inch Dia x 80T H-ATB -3 Deg 5/8 Bore Circular Saw Blade
Designed for chip-free cuts in double-sided melamine and veneered sheet goods on saws without a scoring unit. The H-ATB tooth…
Add to CartMD10-805 Carbide Tipped Thin Walled Aluminum and Non-Ferrous Metals 10 Inch Dia x 80T TCG -5 Deg 5/8 Bore Circular Saw Blade
Designed specifically for cutting relatively thin walled (less than 1/4" thick) aluminum and non-ferrous extrusions and frames. Use a coolant…
Add to CartMD10-806 Carbide Tipped Heavy-Duty Miter/Double Miter 10 Inch Dia x 80T 4+1 -5 Deg 5/8 Bore Circular Saw Blade
These blades are designed especially for glass-smooth compound miter cuts in moldings and picture frame stock for use in a…
Add to CartMD10-816TB Carbide Tipped Thin Kerf Cut-Off & Crosscut 10 Inch Dia x 80T ATB 0 Deg 5/8 Bore Circular Saw Blade
These blades are designed for smooth crosscuts in a variety of materials from hardwoods, softwoods and sheet goods including chipboard.…
Add to CartMD102 Carbide Tipped Straight Plunge Single Flute High Production 1/4 Dia x 1 Inch x 1/4 Shank
A single flute bit should be used where cut speed is more important than cut finish. Improved chip clearance is…
MD102 Carbide Tipped Straight Plunge Single Flute High Production 1/4 Dia x 1 Inch x 1/4 ShankMD102 Carbide Tipped Straight Plunge Single Flute High Production 1/4 Dia x 1 Inch x 1/4 Shank
$15.90Add to CartMD104 Carbide Tipped Straight Plunge High Production 1/16 Dia x 3/16 x 1/4 Inch Shank
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut…
Add to CartMD106 Carbide Tipped Straight Plunge High Production 3/32 Dia x 1/4 x 1/4 Inch Shank
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut…
Add to CartMD108 Carbide Tipped Straight Plunge High Production 1/8 Dia x 7/16 x 1/4 Inch Shank
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut…
Copyright © 2024 All Rights Reserved | CanCam Industrial CNC | Legal Disclaimer | Refund Policy | Privacy Policy