-
57166 Carbide Tipped 4 Wing Cut Out Solid Surface 3-5/8 Dia x 1/4 x 1/2 Inch Shank x 1 Depth of Cut
Use for cutting out undermount bowls, Surell®, Fountainhead® and other solid surface undermount bowls. For Corian® bowls, must be used…
57166 Carbide Tipped 4 Wing Cut Out Solid Surface 3-5/8 Dia x 1/4 x 1/2 Inch Shank x 1 Depth of Cut57166 Carbide Tipped 4 Wing Cut Out Solid Surface 3-5/8 Dia x 1/4 x 1/2 Inch Shank x 1 Depth of Cut
$219.39Add to Cart57169 Carbide Tipped Bevel Lansen Edge Sink Solid Surface 1-3/16 Dia x 1 x 1/2 Inch Shank
This bit is designed specifically for use for the Karran stainless steel edgesinks for 1/2" solid surface materials. They trim…
Add to Cart57170 Carbide Tipped Round Over with Ultra-Glide Radius Bearing Guide Solid Surface 1-7/8 Dia x 1 Inch x 10 Deg x 3/8 Radius x 1/2 Shank
This tool is intended for use on 1/2" thick material. It will put a 3/8" radius round over on the…
Add to Cart57171 Carbide Tipped Karran Stainless Steel Edge Sinks 24 Deg Bevel Solid Surface 1-3/4 Dia x 7/8 x 1/2 Inch Shank Router Bit
This bit is designed specifically for use for the Karran stainless steel edgesinks for 1/2" solid surface materials. They trim…
Add to Cart57181 Carbide Tipped Multi-Trimmer 3/4 Dia x 1 Inch x 1/2 Shank x 4-Flute
For a super-smooth cut finish, use a four-flute bit. Feed rate is reduced, and chipping is virtually eliminated. AMAX Extended…
Add to Cart57184 Carbide Tipped Super Flush Trim 3/4 Dia x 1 Inch x 1/2 Shank x 4-Flute
For a super-smooth cut finish, use a four-flute bit. Feed rate is reduced, and chipping is virtually eliminated. AMAX Extended…
Add to Cart57185 Carbide Tipped Flush Trim Solid Surface 3/4 Dia x 1-1/2 x 1/2 Inch Shank
For a super-smooth cut finish, use a four-flute bit. Feed rate is reduced, and chipping is virtually eliminated. AMAX Extended…
Add to Cart57186 Carbide Tipped Flush Trim Solid Surface 3/4 Dia x 2 Inch x 1/2 Shank
For a super-smooth cut finish, use a four-flute bit. Feed rate is reduced, and chipping is virtually eliminated. AMAX Extended…
Add to Cart57187 Carbide Tipped Multi-Trimmer 3/4 Dia x 2 Inch x 1/2 Shank x 4-Flute
For a super-smooth cut finish, use a four-flute bit. Feed rate is reduced, and chipping is virtually eliminated. AMAX Extended…
Add to Cart57190 Carbide Tipped Corner Rounding with Ultra-Glide Radius Bearing Guide Solid Surface 1-5/8 Dia x 3/4 x 1/2 Radius x 1/2 Inch Shank
This unique tool produces a true 180° bullnose in two passes. Make the first pass with a regular 1/4" x…
Add to Cart57192 Carbide Tipped Corner Rounding with Ultra-Glide Radius Bearing Guide Solid Surface 2-1/8 Dia x 1 Inch x 3/4 Radius x 1/2 Shank
This unique tool produces a true 180° bullnose in two passes. Make the first pass with a regular 1/4" x…
Add to Cart57220 Carbide Tipped Chamfer with Ultra-Glide Ball Bearing Guide Solid Surface 2 Dia x 3/4 x 45 Deg x 1/2 Inch Shank
Chamfer and even bevel solid-surface edges with one of these two bits. These large bits must be run at reduced…
Copyright © 2024 All Rights Reserved | CanCam Industrial CNC | Legal Disclaimer | Refund Policy | Privacy Policy