LB220T641 Carbide Tipped Non-Melt Plastic 220mm Inch Dia x 64T M-TCG, -2 Deg, 30mm Bore

$204.90

Diameter (D) 220mm
Teeth 64
(d) Bore 30mm
Tooth Grind M-TCG
Hook Angle -2°
Application Plastic No Melt
Kerf (B) .126 (3.2mm)
Pinholes 2/7/42
Plate (c) .079 (2.0mm)
SKU: #LB220T641 Categories: , ,

Description

Designed specifically for the Holz-Her® 220mm panel saws.

When cutting acrylics and plastics, “chip-welding” – a melting of the material is a concern. But not with these Non-Melt blades. With a modified triple-chip grind and a 2° negative hook angle, they produce less heat than a standard blade, leaving a crisp and smooth edge.

Excellent for Cutting

  • Plastics
  • Acrylonitrile Butadiene Styrene (ABS)
  • Acetal
  • Acrylic
  • Acrylic Sheets
  • Alupanel®
  • Copolymer
  • Coroplast®*
  • Correx Boards
  • Corrugated Polypropolyene
  • Delrin
  • Ethylene-Vinyl Acetate
  • Foam Board
  • Gatorfoam®**
  • High Density Polyethylene (HDPE)
  • High Impact Polystyrene (HIPS)
  • High Pressure Laminates (HPL)
  • Low Density Polyethylene (LDPE)
  • Lucite®
  • Mechanical/Engineered Plastics
  • Nitrile Rubber
  • Nylon
  • Perspex® Cast Acrylic Sheet
  • Plastic Laminate Flooring
  • Plexiglas®
  • Poly (methyl methacrylate) (PMMA)
  • Polycarbonate (Lexan™)
  • Polyethylene (PE)
  • Polyethylene Terephthalate (PET)
  • Polyethylene Terephthalate Glycol-Modified (PETG / PET-G)
  • Polypropylene (PP)
  • Solid Surface
  • Styrene-Acrylonitrile
  • Styrene-Butadiene Rubber (SBR)
  • Styrene-Isoprene-Styrene (SIS)
  • Teflon®
  • Thermoplastic Polyolefin (TPO)
  • Trespa® Meteon®***
  • Ultra High Molecular Weight Polyethylene (UHMWPE)
  • Wood

*A soft plastic cardboard made with super soft super flexible PVC.

Specifications

(D) Diameter 220mm
Teeth 64
(d) Bore 30mm
Tooth Grind M-TCG
Hook Angle -2°
Application Plastic No Melt
Kerf (B) .126 (3.2mm)
Pinholes 2/7/42
Plate (C) .079 (2.0mm)