55312_255312_2

55312 Carbide Tipped 45 Deg Laminate Miter Joint Undercutter Assembly 1-3/8 Dia x 1/4 x 1/4 Inch Shank

$85.62

Usually ships on the 2nd business day from order date.
(a°) Angle 45°
Diameter (D) 1-3/8
(B) Cutting Height 1/4
Shank (d) 1/4
Overall Length (L) 2-3/8
Replacement Bearing 47708
You will receive a courtesy discount of 5% if your cart exceeds $100 :)

Description

Eliminate that dark line at the edge of a counter or other laminate-covered surface. With this bit assembly, the laminate cemented to the substrate can be trimmed and mitered in one pass. Then a pre-mitered edging strip can be applied. The resulting seam is clean and crisp. Not intended for use in a laminate trimmer.

a. Laminated top is ‘under-cut’, as shown.
b. Apron laminate is pre-cut at 45.°
c. Adhere pre-cut laminate for a perfect fit. A fine file
   may be used to remove the sharp edge after joining.

Specifications

Angle (a°) 45°
Diameter (D) 1-3/8
Cutting Height (B) 1/4
Shank (d) 1/4
Overall Length (L) 2-3/8
Replacement Bearing 47708